十代雅阁安装气动避震，一键低趴，真是太帅了！
Ten generations of accord installation pneumatic shock absorbers, one button low prone, really handsome!
汽车改装属于汽车后市场的一种产物，许多车型因为原厂的设计比较平庸，不能满足玩家的要求，因此就出现了改装行业的繁荣现象，气动避震悬挂的改装属于一种外观的姿态改装，以贴地的美感博的玩家们的好感，视觉的强烈冲击和反常规状态引起强烈的共鸣，一起来欣赏 改装案例|十代 雅阁气动避震低趴风格改装
Car refitting is a product of the automotive aftermarket. Many models can't meet the requirements of the players because of the mediocre design of the original factory. Therefore, the refitting of the pneumatic shock absorber suspension is a kind of appearance posture modification, which causes strong resonance with the good feeling of the players close to the ground, strong visual impact and unconventional state, Let's enjoy the refitting case
Before starting the topic, first of all, what is the use of pneumatic shock absorbers and what are the benefits? But it's definitely not to let the car rise and improve the off-road performance.
First, it is the standard configuration of high-end cars and sports cars, which can control the low height and the soft and hard degree of shock absorption at any time.
Second, it is a kind of automobile refitting style. You can search for the automobile refitting style in the United States, and some of them have changed this style. Once the gas is released after parking, the car will lie down there and prevent Trailer.
Third, the elasticity of the air is better than any kind of spring, and it can even make you feel as smooth as walking on the ground.
Fourth, adjust the body, deep modification of the suspension on each wheel can independently control the stroke of a single suspension, so as to produce different body effects.
There are four advantages mentioned above. In fact, most of the riders want to lower themselves better The lower the car is, the better it is. It is also a matter of great vanity to be able to enjoy the attention of people around.
The name of this shock absorber is an academic name. The popular name is shock absorber or shock absorber. I like to know about this.
The working principle of the shock absorber is mainly used to suppress the shock of spring rebound and the impact from the road. Although the shock absorption spring can filter the vibration of the road surface when passing through the uneven road surface, the spring itself will have reciprocating motion, and the shock absorber is used to restrain the spring jumping. The types of shock absorbers are divided from the angle of producing damping materials. There are mainly two kinds of shock absorbers: hydraulic and pneumatic.
Company name: Shanghai Songjiang shock absorber Group Co., Ltd
English Name: airbft
Address: Shuangdian Industrial Park, Nantong City, Jiangsu Province (Nantong factory of Songjiang group)
Company website: http://hellaflush-china.com Pneumatic shock absorber Forum
Company contact: 13262966665
Email: 981731567@qq.com
