用绞牙桶身来改气包，用气包来替换绞牙避震的弹簧部分，这是比较极端姿态的玩法。很多绞牙玩家最更换绞牙避震后，如果去购买气动避震的话，原来的绞牙避震就浪费了。
Friends who play shock absorbers know that pneumatic shock absorbers are the most expensive and the most delicate.
But it brings the fun of rising and falling at any time, which has always been our favorite topic.
Compared with the mechanical adjustment of the hinge suspension, the height of the body can not be adjusted at any time to cope with various road conditions. Pneumatic shock absorber can adjust the height of the body at any time to walk on the rough road.
We start from its working principle. Pneumatic shock absorber is a shock absorber that controls the height of the body through air pressure, and changes the height of the body through air pressure.
It consists of elastic rubber airbag shock absorber, air pressure control system, air tank in the rear compartment, electronic control system and so on.
According to the function of refitting, it is divided into two parts: shock absorber and controller.
It is a more extreme way to change the air bag with the twist tooth barrel body and replace the spring part of the hinge tooth shock absorber with the air bag. If you buy pneumatic shock absorbers after you replace them, you will waste the original denture shock absorbers
The last method is more reliable and simple.
If you want to buy a brand shock absorber body, it is already a set of shock absorber body when it leaves the factory, and its sealing is very good. The choice of control system in the market is also multifarious, air pump, solenoid valve, control unit, air tank is no longer mysterious. According to different types and functions, it can be divided into many kinds. Through the buttons in the car to control the lifting, this is the control system installed in the car. The lifting process is front up, front down, rear up and back down.
Remote lifting is based on the front, adding a set of remote control system, you can use the remote control to lift the body height, which is also the front up and down front, the rear up and back down.
The control system with memory system is relatively large. On the basis of remote control, the four tires can realize independent lifting and lowering, and the memory function is to memorize the air pressure value to convert the body height.
These three methods are based on the value of the air pressure to determine the height of the car body, belonging to the air pressure memory, all need to install a set of barometers, when installing the barometer, we must pay attention to its sealing.
At present, the most advanced is mechanical memory, which uses the height sensor to memorize the body height. When you are driving alone, the tire pressure value memorized by air pressure is 80 when driving normally.
If it is full, this value may rise to 100, then the height of the tire will be reduced, which will cause undercarriage during driving.
If the height is not corrected in time, the blade and lining will be tardy, which is a defect of barometric memory.
Mechanical memory will always remember the height of the body, even if our body weight has changed, the solenoid valve will feed back the command according to the analysis of the computer system.
To increase the air pressure and control the corresponding body height to keep the body height in memory.
When you turn and roll, it also detects the air pressure of the roll wheels and adds it to keep our body in a normal posture all the time.
Sensitivity can be set according to our driving habits, which is very user-friendly.
There are also some controllers with WiFi module, which can be controlled by mobile phone software. In the case of ignition, memory and four-wheel independent lifting and lowering can be realized. In the flameout state, the height can be adjusted by memory.
Outside the car, you can adjust the height of the car, which is very playable
Company name: Shanghai Songjiang shock absorber Group Co., Ltd
English Name: airbft
Address: Shuangdian Industrial Park, Nantong City, Jiangsu Province (Nantong factory of Songjiang group)
Company website: http://hellaflush-china.com Pneumatic shock absorber Forum
Company contact: 13262966665
Email: 981731567@QQ.com
